I bought a 2007 Dodge Ram 2500 6.7 from auction and found these wires. Does anyone have a diagram for this harness? It is on the connector right next to the brake reservoir. Truck drives fine no codes no lights. Can any of you dodge guys help me out?3 AnswersDodge11 months ago
I just clear coated my fuel tank on my motorcycle and after wait 30 mins to dry I sprayed one last coat. My gun had spit some crap out on the last coat and I don’t know what to do. It spit a lot out and I’m wondering if I can wet sand it out.2 AnswersMaintenance & Repairs1 year ago
my 2004 Mini Cooper s was in a wreck when I bought it and it got a hole in the oil pan. I replaced the oil pan and tried starting it and it just makes one click and the lights dim. I replaced the battery and starter and check connections at the battery. Still no start. I then checked the ground at the body panel to the engine still no start just makes one click. I also tried jumping it with the new battery and still no start. Any help???8 AnswersMaintenance & Repairs3 years ago
I have an 07 6.7 24 valve and I'm getting 4 pod pillar and I am wondering what gauges I should get. I have efi live on it and its fully deleted. I shimmed the fuel and I have head studs. I will be getting a bigger turbo soon but not over big just slightly above stock. also give me detail for example if you say boost say "60psi boost" for each gauge you suggest. Thanks guys!1 AnswerOther - Cars & Transportation3 years ago
I have an 07 cummins with deletes and I’m wondering how I can rigister it somewhere without emissions?
I live in Mesa az and I’d like to register in globe as they do not have emissions. Can I get a P.O. box and do it that way?3 AnswersDodge3 years ago
I have a 92 dodge Dakota v8 5.2 4x4 and I just replaced the starter because I thought the old one went bad. I put the new one in turned the key over and hear click. Just like before. Loose all power to everything then I hit the negative battery cable a few times and power is back on 12 volts at starter and relay was replaced. Anyone know what this could be1 AnswerDodge5 years ago
I have a 92 dodge Dakota 5.2 v8 and I have replaced the spark plugs spark plug wired distributed cap rotor and pick up. The truck ran fine then I drive it in the rain parked it started it 4 hours later and it ran fine again. Tried to start it 3 days later and nothing! I have tested the coil buy plugging a spark plug on it and the coil sparks. Could it be the computer that plugs into the pickup? I traced the wires back to that. Or could it be a magnet in my distributed. And I saw I little oil on my distributed about a tsp of oil. Help!!!!1 AnswerMaintenance & Repairs5 years ago
How many volts should my ignition coil have going into it (the wired going into the coil not the ones leaving. I have a 1992 dodge Dakota 5.2 v82 AnswersDodge5 years ago
I have a 92 dodge Dakota and my oil pressure drops to zero here and there. My oil level is perfect, right on the mark. What could this be? Timing chain has never been replaced could that have something to do with it? Oh and also when the oil level drops you can hear it on the engine. What should I do when it happens next time? The first thing I do is pop it in nutral and shut it off then pull over.5 AnswersMaintenance & Repairs5 years ago
I have an old two cylender lawn mower engine. It has a vary week spark. Replaced coil and spark plugs I am getting wires tomorrow but I don't think that is causing week spark. I think it could be the condenser. Could the condenser cause week spark? I'll take any information. The spark is so week won't even ignight fule. Also sometimes it only sparks after starter is disengaged and engine is doing its last turn.
I have an old two cylender lawn mower engine. It has a vary week spark. Replaced coil and spark plugs I am getting wires tomorrow but I don't think that is causing week spark. I think it could be the condenser. Could the condenser cause week spark? I'll take any information
I'm building a gaming PC and I had to restart it so I did but when I tried to turn it back on nothing happend. No fans no beeps nothing seemed dead. But the mouse laser did work so USB ports worked I'm guessing. What happened? Also reset button doesn't work1 AnswerPC6 years ago